Start with the parts you will actually handle
The Kirby Nendoroid No.669 Meta Knight reissue is a small figure, listed at 2.36 inches (6cm), with several parts that come on and off: a sword, slash effect, cape, interchangeable wings, and a stand. Care here is mostly about handling those parts deliberately rather than treating the figure as one solid object.
Before any cleaning or pose change, empty a clear work surface and keep the small pieces in a tray or shallow dish. The supplied box contents list is your checklist: Meta Knight Nendoroid figure, sword, slash effect, cape, interchangeable wings, and stand.
What the reissue includes
- Kirby Nendoroid No.669 Meta Knight - Reissue: Box contents: Meta Knight Nendoroid figure, sword, slash effect, cape, interchangeable wings, and stand. Knowing the full part list makes it easier to spot a missing piece after a posing session and to store each accessory with the figure.

Kirby Nendoroid No.669 Meta Knight - Reissue - Kirby Nendoroid No.669 Meta Knight - Reissue: The figure uses magnets for posing, similar to the previously released Nendoroid Kirby. Magnetic posing changes how you handle the figure; you are aligning parts rather than forcing joints.
A safe cleaning routine for dust and handling marks
The supplied product information does not include cleaning instructions, so keep your approach conservative. The goal is to remove surface dust without pressing grit into the figure or wetting the magnets and small parts.
- Clear the display area first: Remove the figure and its stand from the shelf, then dust the shelf itself so you are not wiping dust back onto the figure.
- Use a soft, dry tool: A clean soft brush or a dry microfiber cloth is appropriate for light surface dust. Work gently around the cape, wings, and sword rather than scrubbing.
- Keep moisture away from the magnets and small parts: Because the supplied information does not confirm water resistance, avoid wet cleaning. A dry approach also reduces the chance of residue collecting around the magnetic posing points.
- Check the effect parts separately: The slash effect is a separate accessory. Dust it on its own and return it to the tray before handling the figure again.
Posing with magnets without fighting the figure
Meta Knight makes use of magnets for posing, which the product description presents as a way to make movements smooth and easy to place in different positions. Treat that as a handling cue: bring the parts together and let the magnets align, rather than pushing or twisting a limb into place.
The figure also includes parts that let you change the direction he is looking, so you can adjust the head for a pose without forcing the neck. If a pose is not holding, reset the figure on the stand and try a different angle instead of increasing pressure.
Cape, wings, and stand: swap them in the right order
The reissue can be displayed wearing the cape or transformed into its flying version with interchangeable wing parts. The exact swap sequence is not supplied, so use a simple, reversible order that keeps small pieces accounted for.
- Decide on the display mode first: Choose cape or wings before you start handling the figure. That way you only remove and refit the parts once.
- Keep the unused part in the tray: If you switch from cape to wings, place the cape directly in your parts tray rather than on the table where it can be brushed off.
- Seat the figure on the stand before final posing: The stand is included in the box contents. Get the figure stable on it, then adjust the sword, effect, or head direction.
- Recheck the part list after every swap: A quick count against the box contents catches a dropped wing or effect part before it leaves the work area.
Display habits that suit a 6cm figure
At 2.36 inches (6cm), Meta Knight is easy to knock over and easy to lose sight of on a crowded shelf. Give the figure its own clear footprint on the stand, away from heavier collectibles that could fall against it. Keep the sword and slash effect fitted only when the pose is stable; loose accessories are more likely to go missing than the figure itself.
Dust the figure on a regular schedule rather than waiting for visible buildup. Because the supplied information does not confirm a specific cleaning interval or product, set a routine that matches your room: more often on open shelving, less often inside a closed display case.
Storage between displays
- Store the full part set together: Keep the figure, sword, slash effect, cape, interchangeable wings, and stand in one container so the next display does not start with a missing piece.
- Separate the small accessories: A divided tray or small bags keep the effect part and wings from pressing into the figure or each other.
- Avoid stacking weight on the figure: The supplied information does not describe crush resistance, so store the figure at the top of a box or in its own compartment.
What the listing does not confirm
The supplied product record does not include care instructions, an age recommendation, or confirmed joint-tightening guidance. That means you should not assume a specific tightening method or cleaning product is approved for this figure. If a magnet or part feels loose, contact the retailer or manufacturer rather than applying an unverified fix.
The record also does not confirm whether the reissue changes any materials or paint from earlier releases. Keep your care routine based on the parts and posing method that are actually listed, and treat any unlisted feature as unconfirmed rather than absent.


